Fields of application of INARCO® products:​

Removal of

• lacquers, also 2K lacquers
• paints, water- and solvent-based, also UV-curable 
• oils and greases as well as emulsions
• adhesives and plastics

 
Cleaning of

• machine parts and surfaces
• rollers and clichés
• tools, e.g. brushes
• floors (manual or mechanical)

 
Possible applications:

• manual (flat mop, microfiber cloth, cleaning pads, etc.)
• floor cleaning machines (automatic scrubber dryer, single-disc machine, etc.)
• spraying and brushing machines
• ultrasonic systems

---

Examples of how INARCO® products work:

---

cured 2K adhesive on machine part (thin layer): KL-02GB diluted 1:3 with water, cold, after 10min:

The adhesive layer contracts and is completely detached from the surface.
The detached "skin" can be rinsed off with water without any effort or wiped away by hand (here as an example with a cotton swab).

---

cured 2K adhesive on machine part (thick layer): KL-02GB diluted 1:3 with water, cold, after 24h:

The adhesive is lifted off the metal surface and can be removed by hand.

---

5-6 coats of 2K varnish cured on metal: KL-02GB diluted 1:1 with water, 50-70°C, after 1-2h:​

---

The layers of paint can be removed by hand with a spatula or steel wool.

UV-cured ink on metal: LFZ-24CM diluted 1:3 with water, cold, after 5min:

The paint is lifted from the metal surface and can be easily and cleanly wiped off with a cloth or by hand.

---

2K color lacquer on metal, cured: KL-02GB diluted 1:1 with water, cold, after 1h:​

The color lacquer contracts and is lifted off the metal surface. By hand, the color varnish can be removed in shreds.

---

Various varnishes and paints, dried on the floor: FR-11B undiluted, application and cleaning with edge cleaner, after 10min:

The varnish and paint stains can be removed with an edge cleaner. Wiping with water gives a clean result.

---